ZyXEL UAG4100 User Guide - Page 52
Internet Settings: Ethernet
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 4 Installation Setup Wizard • I have two ISPs: (Only for the UAG that has multiple WAN interfaces.) Select this option to configure two Internet connections. Leave it cleared to configure just one. This option appears when you are configuring the first WAN interface. • Encapsulation: Choose the Ethernet option when the WAN port is used as a regular Ethernet. Otherwise, choose PPP Over Ethernet (PPPoE) or PPTP for a dial-up connection according to the information from your ISP. • First WAN Interface: This is the interface you are configuring for Internet access. • Zone: Select the security zone to which this interface and Internet connection belong. • IP Address Assignment: Select Auto if your ISP did not assign you a fixed IP address. Select Static if the ISP assigned a fixed IP address. 4.2.1 Internet Settings: Ethernet This screen is read-only if you set the previous screen's IP Address Assignment field to Auto and click Next. Use this screen to configure your IP address settings. Note: Enter the Internet access information exactly as given to you by your ISP. Figure 24 Internet Access: Ethernet Encapsulation • Encapsulation: This displays the type of Internet connection you are configuring. • First WAN Interface: This is the number of the interface that will connect with your ISP. • Zone: This is the security zone to which this interface and Internet connection will belong. • IP Address: Enter your (static) public IP address. Auto displays if you selected Auto as the IP Address Assignment in the previous screen. The following fields display if you selected static IP address assignment. • IP Subnet Mask: Enter the subnet mask for this WAN connection's IP address. • Gateway IP Address: Enter the IP address of the router through which this WAN connection will send traffic (the default gateway). UAG Series User's Guide 52