ZyXEL UAG4100 User Guide - Page 97
The Traffic Statistics Screen - user manual
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 7 Monitor 7.4 The Traffic Statistics Screen Click Monitor > System Status > Traffic Statistics to display the Traffic Statistics screen. This screen provides basic information about the following for example: • Most-visited Web sites and the number of times each one was visited. This count may not be accurate in some cases because the UAG counts HTTP GET packets. Please see Table 24 on page 97 for more information. • Most-used protocols or service ports and the amount of traffic on each one • LAN IP with heaviest traffic and how much traffic has been sent to and from each one You use the Traffic Statistics screen to tell the UAG when to start and when to stop collecting information for these reports. You cannot schedule data collection; you have to start and stop it manually in the Traffic Statistics screen. Figure 67 Monitor > System Status > Traffic Statistics There is a limit on the number of records shown in the report. Please see Table 25 on page 99 for more information. The following table describes the labels in this screen. Table 24 Monitor > System Status > Traffic Statistics LABEL DESCRIPTION Data Collection Collect Statistics Select this to have the UAG collect data for the report. If the UAG has already been collecting data, the collection period displays to the right. The progress is not tracked here real-time, but you can click the Refresh button to update it. Apply Click Apply to save your changes back to the UAG. Reset Click Reset to return the screen to its last-saved settings. Statistics Interface Select the interface from which to collect information. You can collect information from Ethernet, VLAN, bridge and PPPoE/PPTP interfaces. UAG Series User's Guide 97