ZyXEL UAG4100 User Guide - Page 444
Address Group Summary Screen
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 444 highlights
Chapter 39 Addresses Figure 299 IPv4 Address Configuration > Add/Edit The following table describes the labels in this screen. Table 205 IPv4 Address Configuration > Add/Edit LABEL DESCRIPTION Name Type the name used to refer to the address. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. Address Type Select the type of address you want to create. Choices are: HOST, RANGE, SUBNET, INTERFACE IP, INTERFACE SUBNET, and INTERFACE GATEWAY. IP Address Starting IP Address Ending IP Address Network Netmask Interface OK Cancel Note: The UAG automatically updates address objects that are based on an interface's IP address, subnet, or gateway if the interface's IP address settings change. For example, if you change lan1's IP address, the UAG automatically updates the corresponding interface-based, LAN subnet address object. This field is only available if the Address Type is HOST. This field cannot be blank. Enter the IP address that this address object represents. This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the beginning of the range of IP addresses that this address object represents. This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the end of the range of IP address that this address object represents. This field is only available if the Address Type is SUBNET, in which case this field cannot be blank. Enter the IP address of the network that this address object represents. This field is only available if the Address Type is SUBNET, in which case this field cannot be blank. Enter the subnet mask of the network that this address object represents. Use dotted decimal format. If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE GATEWAY as the Address Type, use this field to select the interface of the network that this address object represents. Click OK to save your changes back to the UAG. Click Cancel to exit this screen without saving your changes. 39.3 Address Group Summary Screen The Address Group screen provides a summary of all address groups. To access this screen, click Configuration > Object > Address > Address Group. Click a column's heading cell to sort the table entries by that column's criteria. Click the heading cell again to reverse the sort order. UAG Series User's Guide 444