ZyXEL UAG4100 User Guide - Page 143

Chapter 9 Wireless 9.3.4 AP Policy Use this screen to configure the AP controller's IP address on the managed APs and determine the action the managed APs take if the current AP controller fails. Click Configuration > Wireless > AP Management > AP Policy to access this screen. Figure 99 Configuration > Wireless > AP Management > AP Policy Each field is described in the following table. Table 58 Configuration > Wireless > AP Management > AP Policy LABEL Force Override AC IP Config on AP Override Type DESCRIPTION Select this to have the UAG change the AP controller's IP address on the managed AP(s) to match the configuration in this screen. Select Auto to have the managed AP(s) automatically send broadcast packets to find any other available AP controllers. Primary Controller Secondary Controller Fall back to Primary Controller when possible Fall Back Check Interval Apply Reset Select Manual to replace the AP controller's IP address configured on the managed AP(s) with the one(s) you specified below. Specify the IP address of the primary AP controller if you set Override Type to Manual. Specify the IP address of the secondary AP controller if you set Override Type to Manual. Select this option to have the managed AP(s) change back to associate with the primary AP controller as soon as the primary AP controller is available. Set how often the managed AP(s) check whether the primary AP controller is available. Click Apply to save your changes back to the UAG. Click Reset to return the screen to its last-saved settings. UAG Series User's Guide 143