ZyXEL UAG4100 User Guide - Page 72
VPN Express Wizard - Configuration, VPN Express Wizard - Summary
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 5 Quick Setup Wizards Rule Name: Type the name used to identify this VPN connection (and VPN gateway). You may use 1-31 alphanumeric characters, underscores (_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. Application Scenario: This shows the scenario that the UAG supports. • Site-to-site - The remote IPSec device has a static IP address or a domain name. This UAG can initiate the VPN tunnel. 5.3.4 VPN Express Wizard - Configuration Figure 49 VPN Express Wizard: Configuration • Secure Gateway: Enter the WAN IP address or domain name of the remote IPSec device (secure gateway) to identify the remote IPSec router by its IP address or a domain name. • Pre-Shared Key: Type the password. Both ends of the VPN tunnel must use the same password. Use 8 to 31 case-sensitive ASCII characters or 8 to 31 pairs of hexadecimal ("0-9", "A-F") characters. Proceed a hexadecimal key with "0x". You will receive a PYLD_MALFORMED (payload malformed) packet if the same pre-shared key is not used on both ends. • Local Policy (IP/Mask): Type the IP address of a computer on your network that can use the tunnel. You can also specify a subnet. This must match the remote IP address configured on the remote IPSec device. • Remote Policy (IP/Mask): Type the IP address of a computer behind the remote IPSec device. You can also specify a subnet. This must match the local IP address configured on the remote IPSec device. 5.3.5 VPN Express Wizard - Summary This screen provides a read-only summary of the VPN tunnel's configuration and commands that you can copy and paste into another ZLD-based UAG's command line interface to configure it. UAG Series User's Guide 72