ZyXEL UAG4100 User Guide - Page 170
PPP Interface Add or Edit
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Chapter 10 Interfaces Each field is described in the table below. Table 71 Configuration > Network > Interface > PPP LABEL User Configuration / System Default Add Edit Remove Activate Inactivate Connect Disconnect Object Reference # Status DESCRIPTION The UAG comes with the (non-removable) System Default PPP interfaces preconfigured. You can create (and delete) User Configuration PPP interfaces. Click this to create a new user-configured PPP interface. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. To remove a user-configured PPP interface, select it and click Remove. The UAG confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. To connect an interface, select it and click Connect. You might use this in testing the interface or to manually establish the connection for a Dial-on-Demand PPPoE/PPTP interface. To disconnect an interface, select it and click Disconnect. You might use this in testing the interface. Select an entry and click Object Reference to open a screen that shows which settings use the entry. See Section 10.3.2 on page 165 for an example. This field is a sequential value, and it is not associated with any interface. The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is inactive. Name Base Interface Account Profile Apply Reset The connect icon is lit when the interface is connected and dimmed when it is disconnected. This field displays the name of the interface. This field displays the interface on the top of which the PPPoE/PPTP interface is. This field displays the ISP account used by this PPPoE/PPTP interface. Click Apply to save your changes back to the UAG. Click Reset to return the screen to its last-saved settings. 10.4.2 PPP Interface Add or Edit Note: You have to set up an ISP account before you create a PPPoE/PPTP interface. This screen lets you configure a PPPoE or PPTP interface. To access this screen, click the Add icon or select an entry in the PPP interface summary screen and click the Edit icon. UAG Series User's Guide 170