ZyXEL UAG4100 User Guide - Page 159

Chapter 10 Interfaces Table 66 Configuration > Network > Interface > Ethernet (continued) LABEL IP Address DESCRIPTION This field displays the current IP address of the interface. If the IP address is 0.0.0.0 (in the IPv4 network), the interface does not have an IP address yet. Mask Apply Reset In the IPv4 network, this screen also shows whether the IP address is a static IP address (STATIC) or dynamically assigned (DHCP). IP addresses are always static in virtual interfaces. This field displays the interface's subnet mask in dot decimal notation. Click Apply to save your changes back to the UAG. Click Reset to return the screen to its last-saved settings. 10.3.1 Ethernet Edit The Ethernet Edit screen lets you configure IP address assignment, interface parameters, DHCP settings, connectivity check, and MAC address settings. To access this screen, select an entry in the Ethernet summary screen and click the Edit icon. (See Section 10.3 on page 157.) Note: If you create IP address objects based on an interface's IP address, subnet, or gateway, the UAG automatically updates every rule or setting that uses the object whenever the interface's IP address settings change. For example, if you change the LAN's IP address, the UAG automatically updates the corresponding interfacebased, LAN subnet address object. UAG Series User's Guide 159