ZyXEL UAG4100 User Guide - Page 181
Bridge Interfaces
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Chapter 10 Interfaces Table 74 Configuration > Network > Interface > VLAN > Edit (continued) LABEL DESCRIPTION Enable Logs for IP/MAC Binding Violation Select this option to have the UAG generate a log if a device connected to this VLAN attempts to use an IP address that is bound to another device's MAC address. Static DHCP Table Configure a list of static IP addresses the UAG assigns to computers connected to the interface. Otherwise, the UAG assigns an IP address dynamically using the interface's IP Pool Start Address and Pool Size. Add Click this to create a new entry. Edit Select an entry and click this to be able to modify it. Remove Select an entry and click this to delete it. # This field is a sequential value, and it is not associated with a specific entry. IP Address Enter the IP address to assign to a device with this entry's MAC address. MAC Enter the MAC address to which to assign this entry's IP address. Description Enter a description to help identify this static DHCP entry. You can use alphanumeric and characters, and it can be up to 60 characters long. MAC Address Setting This section appears when Interface Type is external or general. Have the interface use either the factory assigned default MAC address, a manually specified MAC address, or clone the MAC address of another device or computer. Use Default MAC Select this option to have the interface use the factory assigned default MAC address. Address By default, the UAG uses the factory assigned MAC address to identify itself. Overwrite Default MAC Address Select this option to have the interface use a different MAC address. Either enter the MAC address in the fields or click Clone by host and enter the IP address of the device or computer whose MAC you are cloning. Once it is successfully configured, the address will be copied to the configuration file. It will not change unless you change the setting or upload a different configuration file. Related Setting This section appears when Interface Type is general. Configure WAN_TRUNK Click WAN_TRUNK to go to a screen where you can set this VLAN to be part of a WAN trunk for load balancing. Configure Policy Click Policy Route to go to the screen where you can manually configure a policy route Route to associate traffic with this VLAN. OK Click OK to save your changes back to the UAG. Cancel Click Cancel to exit this screen without saving. 10.6 Bridge Interfaces This section introduces bridges and bridge interfaces and then explains the screens for bridge interfaces. UAG Series User's Guide 181