Brother International 4200CN Users Manual - English - Page 164
Adding Expansion Memory
UPC - 012502607458
View all Brother International 4200CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Adding Expansion Memory 1 Turn the printer off, and then unplug the power cord from the AC power outlet/socket. Caution Before installing the optional accessories, turn the printer off and remove the power plug from the outlet/socket. Installing optional accessories without turning the printer off could result in an electric shock. 2 Loosen the two screws on the interface board located at the back of the printer. 3 Hold the two handles on the interface board and slowly pull the interface board towards you, then lay it on a desk or table. 4 Hold the expansion memory module by the edges and align the notches in the module with the protrusions in the slot. 5 Insert the memory module diagonally (1), then tilt it toward the interface board until it clicks into place (2). To remove the memory module, open the retaining clips on both sides of the module by pushing them outward, grasp both edges of the module and pull it out straight. A - 10 APPENDIXES