Brother International 4200CN Users Manual - English - Page 65
feeding long paper, support each sheet with, your hands to ensure proper feeding.
UPC - 012502607458
View all Brother International 4200CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
3 All stacks of print media, plain paper, transparencies, label sheets, and envelopes, need to be fanned before loading so there is air between the sheets. Fanning the stack helps prevent paper jams. ■ Fan all media before loading. ■ If the paper is poorly cut and the edges are not clean, remove the unsuitable sheets before loading the paper stack. 4 Align the four corners of the paper stack and insert it (print side down) until it lightly touches the feeding slot. ■ Do not use paper that is folded, creased, or warped. ■ Do not overload the paper tray. ■ When printing on sheets longer than Legal paper (356 mm (14 in.)), load the sheets one at a time. Moisture can cause the sheets to stick together, causing more than one sheet to go through at one time, which can result in malfunction or damage to the printer. When feeding long paper, support each sheet with your hands to ensure proper feeding. 5 When loading paper, carefully align the paper guides with the edges of the paper so that there is a small gap between the paper stack and the guides. Pushing the paper guides too hard against the edge of the paper stack can curl the paper and cause paper jams. Load the paper so that it is straight in the paper tray. If the paper is not loaded correctly, the printing position may shift and cause incorrect printing. LOADING PAPER AND USABLE PAPER TYPES 3 - 17