Brother International 4200CN Users Manual - English - Page 32
Confirming Settings, Starting protocols
UPC - 012502607458
View all Brother International 4200CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Continued from the previous step. ↓ Starting protocols Protocol LPD ↓ 6 Press the button once. Protocol Port9100 ↓ 7 Press the button once. Protocol IPP ↓ 8 Press the button once. Protocol NetBIOS TCP/IP ↓ 9 Press the button once. Protocol NetBEUI ↓ Protocol NetWare ↓ Protocol AppleTalk 10 Press the button once. 11 Press the button once. 1. Press the Form Feed/Set button once. XXX indicates the protocol name. XXX 2. Press the Disabled * button once. XXX Enabled 3. Press the Form Feed/Set button once. Reboot system to take effect appears for 3 seconds, and then the following screen will appear. XXX Enabled * 4. To start other protocols, press the Job Cancel/Back or button once, and then continue to the next step. To finish the setup, go to step 12. ↓ 12 Restart the printer. Confirming Settings Print the printer settings list to check the content of printer settings. The printer settings list also contains information that is required when configuring computers for printing. Use the list to confirm that settings on the printer and the computer match. For details about printing the Panel Settings List, see Confirming Printer Configuration and Network Settings on page 7-19. 1 - 9 PRINTER SYSTEM SETTINGS