Brother International 4200CN Users Manual - English - Page 86
Network, Ethernet, TCP/IP
UPC - 012502607458
View all Brother International 4200CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Network Use Network to make or change network settings. ■ You cannot change the Network setting while the printer is processing print data. ■ You must restart the printer for settings to take effect. After programming settings, be sure to restart the printer. Ethernet Use Ethernet to set Ethernet communication speed and mode. ■ Auto (default) 10Base-T Half, 10Base-T Full, 100Base-TX Half, or 100Base-TX Full is selected automatically. ■ 10Base/Half ■ 10Base/Full ■ 100Base/Half ■ 100Base/Full TCP/IP Use TCP/IP to make TCP/IP settings. This menu contains the following: ■ Setup IP Address Select how to obtain an IP address. Parameters are as follows: DHCP (default) The IP address is obtained from a DHCP server on the network. Panel Use this to set the IP address from the control panel. ■ IP Address Use this to set the IP address. [aaa.bbb.ccc.ddd] Set aaa, bbb, ccc, and ddd between 0 and 255. You cannot use the following: 224.xxx.xxx.xxx or 255.xxx.xxx.xxx 127.xxx.xxx.xxx ■ These settings are ignored when you select DHCP in Setup IP Address. To enable the settings, select 'Panel' in 'Setup IP Address'. ■ Specifying the wrong IP address can affect the entire network. Before setting an IP address, call your system administrator. 4 - 13 CONTROL PANEL