Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 125

Set Motion Detection Recording ● Step 1: Click Settings next to On Motion Detection The Motion Detection Settings dialog appears (The dialog for VBC60 is shown below). Click to activate Motion Detection on the Camera Server for VB-C60, VB-C50i/VBC50iR, VB-C50FSi and VB-C50Fi. Allow to divide the detection area into 4 and to set for recording for each divided detection area. Set a priority for events triggered by motion. Select sensitivity options. Detail settings are available for the sensitivity, area ratio, and duration. 4 Register Camera Server and Set Recording Schedule Click and drag a control point to re-size the active region. Motion detection level indicator will increase during activity. Note Select frame rate and pre/post event duration for recording triggered by motion. Activate external device output. This dialog box is only valid when connected to VB-C60, Detect Motion Using is set to Camera Server and Part detective region is checked. On VB-C60, recording settings can be configured separately on each of the four detection regions (tabs). If Detect Motion Using is set to Storage Server, or you are connected to a different camera, or Part detective region is not checked, the video recording settings apply to the entire region. If the Sensor Event recording is also enabled and motion detection and sensor input occur simultaneously, the Sensor Event recording takes precedence. Refer to "Priorities of Motion Detection and Sensor Event Recording" (➝P. 137) for details. You cannot use the Preset Tour and the Motion Detection recording together. 125