Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 163

Start the Viewer Viewer Start-up Option You can set the start-up option of the Viewer to omit the display of Start-up screen (➝P. 77) and login screen to enter a user name and password (➝P. 79, P. 160). You can place a shortcut icon on the Desktop for your convenience by following the method described below. For this setting, you cannot use the shortcut icon that was automatically created on the Desktop after installing this software, which is used for starting the Viewer. Password can be referred through the Properties of the shortcut icon. You need to make sure that the Password is secure. Note 1 Right-click on the icon for NVR_Viewer.exe located in the installation directory and select Create Shortcut from the menu. The shortcut icon will be created. Move it to the Desktop. The default destination directory is shown below. :\Program Files\Canon\WebView\NVR System Drive is a drive that contains a directory (folder) in which the Operating System files are stored. For example, if the Tip Operating System is installed on Drive C, your system drive is Drive C. 2 Right-click on the shortcut icon that was moved onto the Desktop and select Properties from the menu. Specify Target as follows (using alphanumeric characters) -h= This specification is mandatory (➝P. 79, P. 160). -p= It can be omitted. When omitted, 80 is specified (➝P. 79). -u= Specify the user name (➝P. 78). -pw= Specify the password (➝P. 78). -u and -pw can be omitted. When omitted, the start-up screen will not be displayed (➝P. 77, P. 158). Instead, the login screen for entering a username and password is displayed. When you use the Viewer alone, you also need to specify "nohost" for -h. Viewer Reference 5 Example "C:\Program Files\Canon\WebView\NVR\NVR_Viewer.exe" -h=192.168.100.1 -p=80 u=admin -pw=NVR Make sure to enter a space after "C:\Program Files\Canon\WebView\NVR\NVR_Viewer.exe". 163