Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 195

Arrange Video Windows If you have camera control, you can only drag the window by clicking and holding the title bar. Tip If you did not make any control for 30 seconds, the message of ÅgControl will be lost in 10 secondsÅh appears, and a 10second countdown will start. You can still manipulate a camera that is currently recording. If the recording position has been set, the Camera Server will return to that position after the Viewer release camera control. ● Using the Camera Control Panel Pan/Tilt controls. Click Clicking this button Set Night to nudge or click and returns the camera Mode. hold for continuous to face the front. movement. To display, select View > Camera Control from the menu bar, or click the Video window menu icon (or right-click in the Video Window) to bring up a context menu and select Camera Control. If a Video Window is not selected, the preview window will be blank. Click on a Video Window to control the camera. You can control the pan, tilt, and zoom operation using a panorama image. Click inside the Panorama window to adjust the pan and tile angles so that the clicked position becomes the center of the image. Alternatively, you can move or zoom in/out the yellow scope to perform the pan, tilt, and zoom operation. Click this button to Click this button Click this button to display exposure to display white display the smart control (➝ P. 196). balance control shade correction (➝ P. 197). controls at the If preset camera bottom of the panel. angles have been set up by your Administrator, they will be available from a drop-down menu. Switch On and Off of external device output of the camera. When the Video Window is selected, click Get Control. Click Release Control when finished. If the digital zoom is enabled by the Camera Server, a boundary between the optical and digital zoom is displayed. Click and drag the Zoom slider to perform the zoom operation. Click this button to display extended camera control panel (➝ P. 198). When using the VB-C60/VB-C300, you cannot use Night Mode in the following cases: Note When Day/Night is set to Auto on the Camera and Video Settings page When the Night Mode is set to Auto with a recording schedule Panorama picture needs to be set on the Camera Server in advance. VB-C50FSi/VB-C50Fi cannot display panorama picture. Viewer Reference 5 195