Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 55

Storage Server Configuration Dialog ● User Management Tab In the Storage Server Configuration dialog, User Management tab allows you to set up users and their privileges. User Management tab allows you to configure the following privileges: Administrator Not Administrator (Operator) Administrator has access to the Viewer including Camera Server setup, recording schedules and Viewer setup. 3 Check to enable user to have Administrator privileges (full access to configuration functions). Storage Server Configuration Reference Use Add to add users to this field. There is no limit to the number of users you can add. If the Authentication is required when starting this tool box should be checked. Click Apply to save changes. Users who have Operator Status cannot configure, register and change Camera Servers, or configure and change recording schedules. By default, a user called "admin" is created. The password is "NVR". It is strongly recommended that this should be changed after installation. It is necessary to set up users on all Storage Servers. A particular user should be set up to have the same password on each Storage Server. 55