Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 288

Messages List Event type Changing the recording frame rate Displayed Messages Valid recording rate ({recording rate before change} ➝ {recording rate after change} %) "Recording rate" is the ratio of received images that are actually being recorded. If the rate is 100%, then all received images are recorded. If 50%, 1 frame per 2 frames is recorded. Error Number: Error Description 10048: The socket cannot be used. Cause A socket for the communication could not be generated because a large number of TCP connections are used in the PC. 10050: The network is down. The network is down (when a failure occurs in a HUB or router located near the PC). 10051: The network cannot be reached. A failure occurred in a HUB or router near the camera server. 10054: Forcibly disconnected by the camera server. The TCP connection is disconnected because the camera server was restarted or another cause. 10060: Connection timeout A timeout occurred in the TCP connection with the camera server (This occurs when the camera server is down). 10061: The connection to the camera server was rejected. The camera server rejected the TCP connection (This occurs when the port number specification is incorrect or another cause). 10064: The camera server is down. The camera server is down (Normally, 10060 occurs). 10065: The camera server cannot be reached. There are no routes to connect to the camera server (This may also occur when there is a failure in the network cable connected to the PC or HUB). 10091: Failure on the network board There is a failure on the PC network board. 11001: The host name is unknown. The host name in DNS could not be resolved. 11004: The host name is unknown. The host name in DNS could not be resolved (11004 may occur instead of 11001 in 2003). Empty character string Other Winsock Errors 288