Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 283

Messages List Codes 10054 10060 10061 10064 10065 10091 11001 11004 Error Messages An existing connection was forcibly closed by the remote host. Description The connection is disconnected by the camera server due to camera server restart or other cause. This may occur when the camera server is restarted using the restart button on the configuration page on the software-side. However, this rarely occurs. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. A timeout occurred in the TCP connection with the camera server (This occurs when the camera server is down). No connection could be made because the target machine actively refused it. The camera server rejected the TCP connection (This occurs when the port number specification is incorrect or other cause). A socket operation failed because the destination host was down. This is recorded when the camera server is down (Normally, 10060 occurs). A socket operation was attempted to an unreachable host. There are no routes to connect to the camera server (This may also occur when there is a failure in the network cable connected to the PC or HUB). WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. There is a failure on the PC network board. No such host is known. The host name in DNS could not be resolved. The requested name is valid, but no data of the requested type was found. The host name in DNS could not be resolved (11004 may occur instead of 11001 in 2003). Troubleshooting 9 283