Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 274

Messages List Camera Summary window Messages An error occurred while saving the settings in the Master Storage Server. Cause An attempt was made to save the settings, however, saving the Master Storage Server settings failed. Connect to Master Storage Server dialog, Connection Error dialog The host name of the Master Storage Server is invalid. Check the host name or IP address. An attempt was made to connect with an invalid host name/IP address. The port number of the Master Storage Server is invalid. Specify a number in the range of 1 and 65535. An attempt was made to connect with an invalid port number. Edit Camera Server dialog All schedules configured for the 'camera server name' will be deleted. Select "Yes" to continue, or select "No" to cancel. OK was pressed in the Edit Camera Server dialog when a change was made to the camera registered in the camera server. Event Search dialog There are no events. No events to be displayed in Event Search were found. Extract Video dialog Specify the start time and end time so that the time interval is 1 hour or shorter. An attempt was made to configure the time using a value longer than 1 hour. The recorded video data cannot be The recorded video at the specified read. time cannot be read. Failed to extract the video after {hh}:{nn}:{ss} because two or more MPEG-4 tracks are included in the selected time period. You attempted to use Extract Video to save recorded video for a time range that spans two or more MPEG4 recording schedules. Folder Name dialog The name is not specified. Check the settings and try again. An attempt was made to add a layout folder without entering the name. Layout Sequence dialog A user layout cannot be specified in shared layout sequences. Delete the following layout before saving the shared layout sequence. An attempt was made to change the layout sequence that contains a personal layout sequence to a shared layout sequence. Motion Detection Specify the frame rate for the Settings dialog motion detection settings between 'fps' and 'fps'. An invalid value was selected for the motion detection frame rate. Specify the recording frame rate between 'fps' and 'fps'. An invalid value was selected for the motion detection recording frame rate. 274