Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 127

Set Motion Detection Recording ● Step 3: Set the active region for recording In the Active Region field, adjust the region where motion detection is triggered. By default, the Active Region is the full area. In addition you cannot use pan, tilt, and zoom operations in this window. 1 Click one of the corner or edge handles and hold down the mouse button. 2 Drag the handle to change the motiontrigger boundary (dotted frame). 4 The Motion Detection Options field also allows you to set the sensitivity for Motion Detection within the Active Region. Sensitivity and Area Ratio are set by using the two sliding bars. Motion detection status can be confirmed by the Detection Indicator during operation. Register Camera Server and Set Recording Schedule Area Ratio slide bar. Area Ratio marker. Detection Indicator Colors Motion is displayed in the Detection Indicator as a green color bar and will remain green if the level of motion is below the configured Sensitivity and within a defined Area Ratio. If motion reaches the set Sensitivity and Area Ratio, the color bar changes to yellow and if the detected motion remains at the yellow level for the specified duration period, a red color bar is displayed and an event is triggered. The behavior of the Detection Indicator is described as follows. Green color bar - Changed area is less than the specified Area Ratio, i.e., activity remains at the left of the Area Ratio marker. Area Ratio marker. 127