Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 237
Restoration Procedure
![]() |
UPC - 013803055962
View all Canon C50FSi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Restoration Procedure Restore Data from Backup for Data Protection The following explains how to reconstruct the Storage Server for the VK-64/VK-16 for maintenance or recovery from a failure. 1 Check that the PC hardware environment has been restored to the former state. Be sure to use the same folder organization as before. 2 Install the VK-64/VK-16. 3 After installation completes, stop the Storage Server from the Storage Server Configuration window. 4 Restore the VK-64/VK-16's configuration file to the former location. The default location is as follows: Configuration file path for OS other than Windows Vista : \Documents and Settings\All Users\Application Data\Canon\ WebView\NVR\ Configuration file path for Windows Vista :\ProgramData\Canon\WebView\NVR\ 5 Restore the recorded video data file to the former location. The default location is as follows: : \WebView-NVR\videofiles 6 Restore the event data file to the former location. The default location is as follows: : \WebView-NVR\eventfiles 7 Start the Storage Server from the Storage Server Configuration window. 8 Check that the recording operation is performed correctly. Also check that restored video data is played back correctly. 7 Backup Scheme If the Maximum retained history setting is used in the Storage Server Configuration window and the restored video data Note contains data exceeding the retaining period, that data will be deleted when the Storage Server starts. 237
![](/manual_guide/products/canon-c50fsi-network-video-recorder-vk64vk16-administrators-manual-e3a15f3/237.png)