Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 221

Health Check for Storage Server VK Events (Timeline for VK Viewer) If any of the events listed in the table below occurs, you may have to take the specified counteraction. The text within { } in each message depends on the situation. Event type Indicates the free space on the disk Message Indication (on) / recovery (off) {Drive Name} is running out of space: {Situation} Description This event occurs when the disk free space has run under the specified value or the used disk space has exceeded the specified valued. In this case, data may be deleted before the designated storage time elapses. Disk capacity indication is only effective when it is on. Counteraction example Review the recording and Camera Server settings (➝P. 57, P. 100) Starts and stops deletion due to space shortage. (*) Start (on)/Stop (off) Deleting files on Drive {Drive Name} due to disk free space shortage: {Situation} This event occurs when the disk free space has run under the threshold value or the used disk space has exceeded the threshold valued. Pauses and resumes recording due to space shortage. (*) Start (on)/Stop (off) Recording paused due to disk free space shortage on Drive {Drive Name}: {Situation} This event occurs when the disk free space has run under the threshold value or the used disk space has exceeded the threshold valued. Connection error to the Camera Server Error occurrence (on) / recovery (off) Connection to host ({Camera Server Address}: {Port}): {Situation} This event occurs when an error has occurred while connecting to the Camera Server. However, it does not necessarily occur for every connection failure. When this event occurs, the recording engine tries for reconnection and a COMM error occurs if the retry fails. Review the network connection (➝ P. 100). Recording frame rate change Effective recording rate ({recording rate before change} ➝{recording rate after change} %) Example: Ex. "Recording rate (100.0 › 90.0 %)" * This is not an On/Off event. This event indicates that the recording frame rate has been reduced due to increased server load. Review the recording settings or consider adding the Storage Server (➝ P. 88). For the items marked with (*), refer to "Disk Space Management " (➝ P. 64). Operation and Management 6 221