Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 278

Messages List Messages POP password error: 0 POP response: Cause When sending E-mail, the password entered for the POP server could not be verified. Action Check the Storage Server configuration to see if the entered password is correct. Error resolving name for SMTP server host: port Error: : When sending E-mail, the recording engine could not resolve the host name of the SMTP server. Refer to the corresponding Winsock error code in "A List of Error Codes in Log File" (➝ P. 282). Error connecting SMTP to server host: port Error: : When sending E-mail, the recording engine could not connect to the SMTP server. Refer to the corresponding Winsock error code in "A List of Error Codes in Log File" (➝ P. 282). Error sending E-mail. SMTP server log follows: The recording engine could not send E-mail due to a communication error with the SMTP server. Please refer to the SMTP server log for details. Refer to the corresponding SMTP error code in "A List of Error Codes in Log File" (➝ P. 282). NVR recording engine stopping This is always displayed when the No action is required. recording engine stops. NVR Recording Engine startup complete. Log level = () This is always displayed when the recording engine starts. The value in "Log Level" indicates the log level that is currently being configured (The default is 1). No action is required. Unable to register a drive for camera :. The storage destination drive configured for this camera server has been deleted. Change the storage destination drive of the camera server in Configuration of the Viewer. When the drive of the camera server remains unchanged even after this message is displayed, the Viewer may become unable to connect to the Storage Server. When this occurs, stop the Storage Server and open the following file using notepad or other application to delete the drive configuration in which the problem is occurring. Error deleting old file . A system error occurred when deleting the file. This file is probably being used by the access engine or other application. When this file is being used for playing a recorded video, this error is normal. There is no necessary action. 278