Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 60

Setting the Settings Tab To remove a network drive Select a network drive and click OK to delete the selected drive from the Storage Server. About Network Drive VK-64/VK-16 can record videos on a drive on the network. The Note drive type is shown at the head of the Drive drop-down menu as "Internal disk: local, Network drive: network". About Video Recording Operation If disk space is not enough to cover the specified value configured with Maximum disk space used, the retained duration of recorded video may be shorter than the specified period or the recording may be temporarily stopped. Please be sure to perform sufficient tests before starting operations. For details about disk space management on the Storage Server, refer to "Disk Space Management" (➝ P. 64). Windows does not allow a user who has logged in with a local system account (used for normal service management) to add a network drive. The Add network drive and Delete network drive items are disabled while you are logging into Windows with a local system account. To set the network drive, click Stop Storage Server to stop the Storage Server, and click the Logon Settings and switch to an account which is allowed to use the network drive (i.e., account with Windows' Administrator and Logon As Service privileges). Refer to P.63 for the Logon As Service privilege. You cannot use a UNC path or removable disk when adding a network drive. If you add or delete a network drive, the Storage Server program will reboot. Multiple Storage Servers cannot use the same network drive simultaneously. Single network drive cannot allocate to multiple drivers. If the selected network drive cannot be accessed because the network is disconnected, the selected drive is powered off, or you entered a wrong path, the following error message will appear. "Network path cannot be found." While the network drive is not operating (e.g., due to network disconnection), video will not be recorded until the drive recovers. If a storage server is booted when the storage server is unable to connect to a NAS server, video image data won't be written to or recorded data won't be read from NAS server even after the NAS server recovers. In such case, reboot the storage server. 60