Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 134
Step 4: Set the Night Mode VB-C60, VB-C300, VB-C50i/VB-C50iR
UPC - 013803055962
View all Canon C50FSi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Set Sensor Event Recording If you set the Preset option in the Sensor Event Settings window, the pre-event recording position may be different from the specified position Tip because the Camera Server moves when a sensor input occurs. Also, if you specify the post-event recording time to "0", and the sensor input occurs for a short period of time, recording may terminate before the Camera Server reaches the preset position. If you are using a normal close type sensor, you need to set the presets with the Camera Server recording screen. Refer to "Configure External Device Input" (➝ P. 96) for the details. ● Step 4: Set the Night Mode (VB-C60, VB-C300, VB-C50i/VB-C50iR, VB-C50FSi, and VB-C50Fi) Select the Night Mode from the dropdown menu. You can select from Disabled, Enabled, or Not specified. ● Step 5: Set Additional Options (VB-C60, VB-C300) To use the Exposure, White Balance, Shade Control, and/or Focus settings on the Camera Control Panel, check the corresponding check box. The additional options are available with VB-C60 and VB-C300 only. S. Shade Control only has an effect on VB-C60. Note If Exposure is set, the Exposure Compensation option is set to Not Specified. ● Step 6: Set frame rate and pre and post event recording duration In the Record Video At field: 1 Max. Frame Rate - select a maximum frame rate for recorded video from the drop-down menu, or enter a value from the keyboard. Choose from 0.1 to 30 frames per second (5 is the default). 134