Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 126

Set Motion Detection Recording ● Step 2: Set Motion Detection Options Set the following options on the Motion Detection Settings dialog. 1 In the Detect Motion Using menu, select one of the following: Storage Server Obtains video from the Camera Server and detects motion with the Storage Server. Camera Server Uses the Motion Detection function of the Camera Server to detect motion (This menu is only active for VB150 servers with the Video Input set to Single or VB-C60, VB-C50i/VB-C50iR, VB-C50FSi, VBC50Fi). 2 In the Analysis Frame Rate menu, select from 0.1 to 30 frames per second. If you select the Camera Sever to detect motion, Settings becomes available. Settings is now enabled. Click to launch your VB Admin Motion Detection Setting Tool. Install the VB Admin Tools that is bundled with the VB-C60, VB-C50i/VB-C50iR, VB-C50FSi, and VBC50Fi in advance. Refer to the Camera Server's User's Manual for how to configure the motion detection settings. To use the Motion Detection function of the VB-C50i/VB-C50iR, VB-C50FSi and VB-C50Fi, it is necessary to configure Note schedules from the "VB Admin Schedule Setting Tool". Setting motion detection at the Storage Server causes high CPU load. It is strongly recommended to set motion detection at the Camera Server whenever it has the motion detection function. Detect Motion Using cannot be set to Storage Server when the resolution is set to MPEG-4. 126