Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 58

Setting the Settings Tab If Reduce recording frame rate when disk is under high load is checked, you will receive an event notification such as Effective Tip "Recording rate ( ➝ %)" when the recording frame rate drops. Ex. "Effective Recording rate (100.0 ➝ 90.0 %)" When the free disk space has fallen below the value specified in the Low Disk Space Warning Level field, an event occurs and an Note event notification mail is sent. Also, if the used disk space exceeds the value specified in the Maximum disk space used field, recorded video will not be saved until the required free disk space is secured. Refer to P. 64 for the disk space management. ● Select Disk Drive Settings 1 Drive - Select the disk drive to configure, from the drop-down menu. 2 Maximum disk space used Check the box and enter a value in Megabytes (MB) or Gigabytes (GB), for example, "50". This establishes the maximum disk space used for all video files on the specified drive. 3 Add Network Drive - Add a disk drive on the network used as the network drive. The added network drive is shown on the Drive drop-down menu. 4 Delete Network Drive - Delete an added network drive. ● Adding Removing a Network Drive 7, By adding a network drive, you can save recorded video data on a network drive such as NAS (Network Attached Storage) in addition to the internal HDD. If you add a network drive in the Storage Server Configuration window, the drive will be added to the list of the pull-down menu of the Add/Edit Camera Server dialog (➝ P. 93, 100). Use recommended NAS servers with Windows Storage Server 2003 or Windows Storage Server 2003 R2. Note When using the Storage Server with the local system account, the Add Network Drive and Delete Network Drive buttons are Tip disabled. 58