Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 95

Register Camera Server If you have a Multi-Terminal Module VB-EX50 unit plugged into a VB-C50i/VB-C50iR, VB-C50FSi, VB-C50Fi and have configured the Tip "Use External Video Input", video seen in the Viewer may be taken from cameras connected to the Multi-Terminal Module. Switch the video at the Admin Viewer as required. ● Select a Storage Server 1 Select a Storage Server from the drop-down menu which lists pre- configured Storage Servers and enter the Host Name or IP address in Host Name or IP and Port number in Port. The Host Name or IP must be 4 255 characters or less (each label, separated by a period, must be 63 characters or less) and the Port number must be a figure within the range from 1 to 65535. 2 If you do not want the Camera Server to record video, select Do not record from the drop-down menu of Storage Server. Register Camera Server and Set Recording Schedule Recording schedules should be set in order to record video. Note There is a maximum number of 64 Camera Servers that can be registered on one Storage Server with VK-64 (or 16 cameras with Network Video Recorder VK-16). If you are using the Viewer only, the Storage Server cannot be configured. If you have changed the Camera Server's IP address, you also need to change the host names in the Connection Settings and Storage Server Settings dialogs. ● Configure Recording Stream Usage (VB-C60) VB-C60 has a video recording stream function that temporarily saves images in the camera memory as a function to handle packets dropped due to network interruptions, etc. To use the recording streams, select the Use the stream for recording checkbox. 95