Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 270

Messages List Recording Schedule Special Day Schedule Viewing Screen Messages The schedule for the following camera is not created because the specified time frame has already been configured for another schedule. Cause The Recording Schedules window was dragged in order to add multiple recording schedules, however the camera server for which a schedule has already been configured exists. The multiple schedules could not be added. All of the schedules attempted to create overlap with other schedules. A layout or layout sequence with the same name exists in the folder to which the layout or layout sequence is moved or copied. At least one type of recording must be selected. You turned the audio recording mode on when all of the video recording modes were off. If you select "Custom" in the Preset drop-down menu, you cannot use digital zoom. You attempted to operate the digital zoom region of the VB-C60 while Custom was selected. This special day schedule is added with a date that uses a schedule. Delete the date before deleting the special day schedule. An attempt was made to delete the special day schedule that is planned to execute. This date is already used. In order to use it in another special day schedule, the date must be deleted from the original special day schedule 'special day schedule name'. An attempt was made to use the data for which another special day schedule is already configured. The end time of the special day schedule cannot be set on the next day. Check the settings and try again. An attempt was made to register a schedule that passes 24:00. This special day schedule name cannot be used because it already exists. An attempt was made to add a special day schedule with a name that is already registered. Communication with the Storage Server 'Storage Server name' failed. Press OK to reconnect to the Storage Server. When Cancel is pressed, the video information and event information of the camera servers registered in this Storage Server can no longer be referred. Restart the Viewer manually. When displaying the Viewing Screen, the Viewer connects to a Storage Server. An error occurred during this process. When multiple Storage Servers are registered, the Viewing Screen may be displayed for each of the servers. 270