Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 268

Messages List Adding/Editing a Location and Zone Messages Delete the added zone before deleting the location. Cause An attempt was made to delete the location for which a zone has been added. Select a location. An attempt was made to add a zone while the location has not been registered. This zone name cannot be used because it already exists. An attempt was made to add a zone with a name that has been already registered. The zone name is not specified. An attempt was made to register a zone without entering the name. Delete the added camera server before deleting the zone. An attempt was made to delete the zone for which a camera server has been added. Adding a Camera Server The recording settings of this camera server have already been configured in the selected Storage Server. Check the settings and try again. Even though video of a camera server is configured to be recorded in the Storage Server, the IP address and port used are the same as the camera server that has been configured in the Storage Server. Select a location and zone. An attempt was made to add a camera server without selecting a location and zone. Select a location and zone. 'Camera number' An attempt was made to add a camera server without selecting a location and zone. This is displayed when VB150 is in the "simultaneous" mode and multiple cameras are connected. The camera server with the same host name and port number is being deleted. Save the changes and add the server again. After deleting the camera server, an attempt was made to add the camera server again when the changes have not been saved. The host name specified in "Connection Settings" is invalid. Check the host name or IP address. An attempt was made to connect with an invalid host name/IP address. The port number specified in "Connection Settings" is invalid. Specify a number within the range of 1 and 65535. An attempt was made to connect with an invalid port number. 268