Canon PIXMA MP510 Quick Start Guide - Page 42
Important, Caution - print head
View all Canon PIXMA MP510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5 Install the ink tank. (1) Insert the front end of the ink tank into the Print Head. *1 (2) Press on the mark on the ink tank until the ink tank snaps firmly into place. (3) Make sure that the ink tank lamp lights up red. Important The machine cannot be used unless all the ink tanks are installed. (1) (2) (3) 6 Lift the Scanning Unit (Printer Cover) slightly to set the Scanning Unit Support back to its original position, and then gently close the Scanning Unit (Printer Cover). Caution Be sure to hold the Scanning Unit (Printer Cover) firmly, and be careful not to get your fingers caught. Note z If the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see "Error Message Is Displayed on the LCD" on page 57. z When you start printing after replacing the ink tank, Print Head Cleaning is performed automatically. Do not perform any other operations until Print Head Cleaning finishes. *1 Make sure the position of the tank matches the label. 38 Routine Maintenance