Canon PIXMA MP510 Quick Start Guide - Page 63
LCD Cannot Be Seen At All or Is Hard to See, An Unintended Language Is Displayed on the LCD
View all Canon PIXMA MP510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
LCD Cannot Be Seen At All or Is Hard to See Cause The display on the LCD is hard to see. Cannot see the display on the LCD. Action If the contrast of the LCD is too strong or too weak, adjust it in the Adjust contrast menu in the Maintenance/settings. Refer to "Changing the Machine Settings" in the User's Guide on-screen manual. z If the POWER lamps is off The machine is not powered on. Connect the power cord and press the ON/ OFF button. The machine will power on and the LCD will display a message. z If the POWER lamps is lit The LCD may be in the screen-saver mode. On the Operation Panel, press a button other than the ON/OFF button. An Unintended Language Is Displayed on the LCD Cause Action The language you want to be displayed is not selected. Select the language you want to be displayed according to the following procedure. (1)Press the COPY button, wait for 5 seconds, and then press the MENU button. (2)Press the ] button once, then press the OK button. (3)Press the ] button once, then press the OK button. (4)Press the } button three times, then press the OK button. If the Bluetooth Unit is connected, press the } button four times, then press the OK button. (5)Use the { or } button to select the language you want to be displayed, then press the OK button. Troubleshooting 59