Canon PowerShot SX420 IS User Manual - Page 54
Shooting Range and Focusing
View all Canon PowerShot SX420 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Shooting Range and Focusing Shooting Close-Ups (Macro) Still Images Movies To restrict the focus to subjects at close range, set the camera to [ ]. For details on the range of focus, see "Shooting Range" (= 142). ●●Press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button. ●●Once the setting is complete, [ ] is displayed. ●● If the flash fires, vignetting may occur. ●● Be careful to avoid damaging the lens. ●● When the zoom position is within the range of the yellow bar below the zoom bar, [ ] turns gray and the camera cannot focus. ●● To prevent camera shake, try mounting the camera on a tripod and shooting with the camera set to [ ] (=34). Shooting Distant Subjects (Infinity) Still Images Movies To restrict the focus to distant subjects, set the camera to [ ]. For details on the range of focus, see "Shooting Range" (= 142). ●●Press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button. ●●Once the setting is complete, [ ] is displayed. Digital Tele-Converter Still Images Movies The focal length of the lens can be increased by approximately 1.6x or 2.0x. This can reduce camera shake because the shutter speed is faster than it would be if you zoomed (including using digital zoom) in to the same zoom factor. ●●Press the [ ] button, choose [Digital Zoom] on the [ ] tab, and then choose the desired option (=25). ●●The view is enlarged and the zoom factor is displayed on the screen. Before Use Basic Guide Advanced Guide 1 Camera Basics 2 Auto Mode 3 Other Shooting Modes 4 P Mode 5 Playback Mode 6 Wi-Fi Functions 7 Setting Menu 8 Accessories 9 Appendix Index ●● The digital tele-converter cannot be used with digital zoom (=33) or AF-point zoom (=39). 54