Canon PowerShot SX420 IS User Manual - Page 83
Choose the camera to connect., Adjust the privacy setting., Send images.
View all Canon PowerShot SX420 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
7 Choose the camera to connect. ●●When the screen for choosing the target camera is displayed on your smartphone, choose the camera to pair them. 8 Adjust the privacy setting. ●●Press the [ ][ ] buttons to choose [Yes], and then press the [ ] button. ●●You can now use the smartphone to browse, import, or geotag images on the camera or shoot remotely. 9 Send images. ●●Press the buttons to choose [Select and send], and then press the [ ] button. ●●Press the [ ][ ] buttons to choose [Select], and then press the [ ] button. ●●Press the buttons to choose an image to send, press the [ ] button to mark it as selected ([ ]), and then press the [ ] button. ●●Press the [ ][ ] buttons to choose [OK], and then press the [ ] button. ●●Press the buttons to choose [Send], and then press the [ ] button. ●●[Transfer completed] is displayed after the image is sent, and the image transfer screen is displayed again. ●●To end the connection, press the [ ] button, press the [ ][ ] buttons on the confirmation screen to choose [OK], and then press the [ ] button. You can also use the smartphone to end the connection. ●●To add multiple smartphones, repeat the above procedure starting from step 1. ●● All images in the camera can be viewed from the connected smartphone when you choose [Yes] in step 8. To keep camera images private, so that they cannot be viewed from the smartphone, choose [No] in step 8. ●● Once you have registered a smartphone, you can change privacy settings for it on the camera (=103). ●● Connections require that a memory card be in the camera. ●● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu. You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the [ ][ ] buttons, and then configure the setting. ●● If you prefer not to display recent target devices, choose MENU (=25) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] > [Target History] > [Off]. ●● To be able to connect without entering the password in step 5 and to make it so that [Password] does not display on the SSID display screen (step 4), choose MENU (=25) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] > [Password] > [Off]. ●● You can also send multiple images at once and change the image size before sending (=97). ●● You can send the current image by choosing [Send this image] on the screen in step 9. Before Use Basic Guide Advanced Guide 1 Camera Basics 2 Auto Mode 3 Other Shooting Modes 4 P Mode 5 Playback Mode 6 Wi-Fi Functions 7 Setting Menu 8 Accessories 9 Appendix Index 83