Canon imageRUNNER ADVANCE 8295 imageRUNNER ADVANCE 8200 Srs Basic Operation Gu - Page 116
Removing Trim Waste (Inner Booklet Trimmer-A1
![]() |
View all Canon imageRUNNER ADVANCE 8295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Removing Trim Waste (Inner Booklet Trimmer-A1) This section describes how to remove the trim waste from the trim waste tray. When the trim waste tray of the Inner Booklet Trimmer-A1 becomes full, a screen prompting you to remove the trim waste appears on the touch panel display. Follow the procedure described below to remove the trim waste. Take care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to replace a staple cartridge, discard the punch waste/trim waste/staple waste, or clear paper or staple jams, prints may still be output if other optional units are operating normally, and are not involved in the paper or staple jam removal procedure. • This procedure is necessary only if the Inner Booklet Trimmer-A1 is attached to the Booklet Finisher-N1. • When the trim waste tray is full, you cannot make copies or prints using the Trim mode. • For more information on the procedure for removing trim waste when the Booklet Finisher-Q1 PRO and Booklet Trimmer-D1 are attached, consult the instruction manuals that come with the optional products. 1 Open the front cover of the finisher. 2 Pull out the trim waste tray. 116
![](/manual_guide/products/canon-imagerunner-advance-8205-imagerunner-advance-8200-srs-basic-operation-guide-cf43429/116.png)