Canon imageRUNNER ADVANCE 8295 imageRUNNER ADVANCE 8200 Srs Basic Operation Gu - Page 73

Routine Maintenance 4 Place the Tab Feeding Attachment Kit-B1 aligning the mark for tab paper. 1 Place the Tab Feeding Attachment Kit-B1 aligning the mark for tab paper. 2 Slide the Tab Feeding Attachment Kit-B1 to the back of the paper drawer. 5 Place the Tab Feeding Attachment Kit-B1 aligning the mark for tab paper. 1 Load the tab paper face down with the tabs facing left. Even out the edges of the paper stack. Load the paper stack against the right wall of the paper drawer. 2 Gently push the paper drawer back into the machine until it clicks into place in the closed position. When returning the paper drawer to its original position, be careful not to get your fingers caught, as this may result in personal injury. • Paper which has been rolled or curled must be straightened out prior to use. • You will not be able to make copies or print if you load paper that exceeds the loading limit mark (. ) or if the paper drawer is not completely pushed into the machine. • Make sure that the height of the paper stack does not exceed the limit mark ( ) at the back of the paper drawer. • Always check that the paper drawers are in place. • Never place paper or any other items in the empty part of the drawer next to the paper stack. Doing so may cause paper jams. • When you are not loading tab paper, make sure to return the Tab Feeding Attachment Kit-B1 to its holder. Using the Tab Feeding Attachment Kit-B1 for storing paper other than tab paper may cause a paper jam. 73