Canon imageRUNNER ADVANCE 8295 imageRUNNER ADVANCE 8200 Srs Basic Operation Gu - Page 226
Setting the Limited Functions Mode from the Service Call, Message Screen
View all Canon imageRUNNER ADVANCE 8295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Setting the Limited Functions Mode from the Service Call Message Screen When [Limited Functions Mode] is displayed, follow the procedures below. If you turn OFF the main power switch when there is a job waiting to print, that job is erased. If you set Limited Functions Mode to 'On' from the Service Call Message screen, the item corresponds to [Limited Functions Mode] in [Management Settings] (Settings/Registration) is also set to 'On'. (See e-Manual > Security.) 1 Press [Limited Functions Mode] [Yes]. A message prompting you to restart the machine (turning the main power switch OFF, and then ON) appears. 2 Turn OFF the main power of the main unit. 1. Open the main power switch cover. 2. Press the main power switch to the " " side. 3. Close the main power switch cover. 3 Wait at least 10 seconds after the Main Power Indicator is turned off, and then turn the main power switch back to ON. 1. Open the main power switch cover. 2. Press the main power switch to the "I" side. 3. Close the main power switch cover. The machine starts up in the Limited Functions mode. 226