Canon imageRUNNER ADVANCE 8295 imageRUNNER ADVANCE 8200 Srs Basic Operation Gu - Page 187
Remove any jammed paper in the output area of the saddle stitcher unit.
View all Canon imageRUNNER ADVANCE 8295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Troubleshooting 10Turn the dial on the pressing unit (F-C6) in the direction of the arrow (counterclockwise), and push it as far left as it will go. 1. Turn the dial on the pressing unit (F-C6). 2. Push the pressing unit (F-C6) as far left as it will go. If the pressing unit is in its proper position, this procedure is unnecessary. The pressing unit is for ensuring a clean fold in the center of the paper to create a booklet. If the pressing unit is not in its proper position, the paper to be saddle stitched cannot be fed to the booklet tray. 11Remove any jammed paper in the output area of the saddle stitcher unit. 1. While pushing in the dial (F-C7), turn it in the direction of the arrow (clockwise) until the lamp turns off. 2. Remove any jammed paper in the output area of the saddle stitcher unit. 12While opening the delivery guide (F-C8), remove any jammed paper. 1. Open the delivery guide (F-C8). 2. Remove any jammed paper. 187