Canon imageRUNNER ADVANCE 8295 imageRUNNER ADVANCE 8200 Srs Basic Operation Gu - Page 119

E514h, E530h, E568h, E583h, Press, Settings/Registration., Press [Management Settings]

Page 119 highlights

Routine Maintenance E514h, E530h, E531h, E532h, E537h, E540h, E542h, E568h, E56Dh, E578h, E57Bh, E57Ch, E583h, E584h Cause: Remedy: Tray A/B/C of the Staple Finisher-N1/Booklet Finisher-N1 is out of order. You can make copies/prints by operating the Limited Functions Mode and fixing the tray position. E590h, E591h, E592h, E593h Cause: Remedy: The Puncher Unit-BF1 is out of order. You can make copies/prints using functions other than the hole punch function by operating the Limited Functions Mode. After setting the Limited Functions Mode to 'On', the corresponding function will be grayed out on the display, and cannot be used. 1 Press (Settings/Registration). 2 Press [Management Settings]  [Device Management]  [Limited Functions Mode]. For instructions on setting the Limited Functions Mode from the Service Call Message screen, see "Setting the Limited Functions Mode from the Service Call Message Screen," on p. 226. 3 Select the finishing mode you want to limit. 119

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264

119
Routine Maintenance
E514h, E530h, E531h, E532h, E537h, E540h, E542h, E568h, E56Dh, E578h,
E57Bh, E57Ch, E583h, E584h
Cause:
Tray A/B/C of the Staple Finisher-N1/Booklet Finisher-N1 is out of order.
Remedy:
You can make copies/prints by operating the Limited Functions Mode and fixing the tray position.
E590h, E591h, E592h, E593h
Cause:
The Puncher Unit-BF1 is out of order.
Remedy:
You can make copies/prints using functions other than the hole punch function by operating the
Limited Functions Mode.
After setting the Limited Functions Mode to ‘On’, the corresponding function will be grayed out on the display, and cannot be
used.
1
Press
(Settings/Registration).
2
Press [Management Settings]
[Device Management]
[Limited Functions
Mode].
For instructions on setting the Limited Functions Mode from the Service Call Message screen, see “Setting
the Limited Functions Mode from the Service Call Message Screen,” on p. 226.
3
Select the finishing mode you want to limit.