Canon imageRUNNER ADVANCE 8295 imageRUNNER ADVANCE 8200 Srs Basic Operation Gu - Page 209
Open the front cover of the finisher., Pull out the staple case from the saddle stitcher unit F-C4.
![]() |
View all Canon imageRUNNER ADVANCE 8295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Troubleshooting Saddle Stitcher Unit of the Booklet Finisher-Q1 PRO Check the location of the staple jam, and follow the procedure described below, and the procedure that appears on the touch panel display, to remove any jammed staples. • Take care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to replace a staple cartridge, discard the punch waste, discard the trim waste, discard the staple waste, or clear paper or staple jams, prints may still be output if other optional units are operating normally, and are not involved in the paper or staple jam removal procedure. • Before clearing the staple jam, remove all output sheets from the booklet tray. • The Booklet Finisher-Q1 PRO is an optional products. • If a paper jam occurs at the same time as a staple jam, remove the jammed paper before removing the jammed staples. 1 Open the front cover of the finisher. 2 Pull out the staple case from the saddle stitcher unit (F-C4). 1. Pull out the saddle stitcher unit (F-C4). 2. Pull out the staple case. 209
![](/manual_guide/products/canon-imagerunner-advance-8205-imagerunner-advance-8200-srs-basic-operation-guide-cf43429/209.png)