Home » Canon Manuals » Multifunction Devices » Canon imageRUNNER ADVANCE 8295 » Manual Viewer

Canon imageRUNNER ADVANCE 8295 imageRUNNER ADVANCE 8200 Srs Basic Operation Gu - Page 81

something similar., Remove the two blue screws on the inner size change plate using a coin or

View all Canon imageRUNNER ADVANCE 8295 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

Routine Maintenance 9 Align the rear edge retainer with the marks for the desired paper size. B5 LTR A4 If the rear edge retainer is not aligned properly, paper may become jammed, the quality of the image may be degraded, or the inside of the machine may become dirty. Make sure to load paper with the rear edge retainer properly aligned with the paper size marks on the top and base of the paper deck. 10Fix the rear edge retainer with the blue screw using a coin or something similar. Fix the screws by turning them in the clockwise direction. There are two screw holes for fastening the rear edge retainer. Make sure that it is fastened properly (aligned with the marks for the desired paper size) to prevent it from being installed at an angle. 11Remove the two blue screws on the inner size change plate using a coin or something similar. 81

Section	Page
Before You Start Using This Machine	9
What This Machine Can Do	10
Main Power and Energy Saver Key	12
Parts and Their Functions	14
Control Panel and Touch Panel Display	17
Main Menu Screen Settings	22
Changing Settings According to Your Needs	24
Flow of Basic Operations	25
How to Make a Copy	26
Things You Can Do with the Copy Functions	28
Sending a Fax	32
Things You Can Do with the Fax Functions	34
Sending Scanned Data (E-Mail/I-Fax/File Servers)	38
Things You Can Do with the Scan and Send Functions	40
Storing Scanned Data	44
Things You Can Do with the Scan and Store Functions	46
Printing Stored Data	48
Sending Stored Data	50
Things You Can Do with the Access Stored Files Functions (File Operation)	52
Things You Can Do with the Access Stored Files Functions (Print)	53
Things You Can Do with the Access Stored Files Functions (Send)	56
Operating the Machine from a Computer (Remote UI)	58
Printing from a Computer	60
Routine Maintenance	63
Loading Paper	64
Replacing the Stamp Cartridge (Duplex Color Image Reader Unit-G1)	90
Replacing the Staple Cartridge (For Optional Products)	93
Removing Staple Waste (For Optional Products)	107
Removing Punch Waste (For Optional Products)	111
Removing Trim Waste (Inner Booklet Trimmer-A1)	116
Operating the Limited Functions Mode	118
Replacing the Toner Cartridge	121
Routine Cleaning	126
Consumables	136
Troubleshooting	139
Clearing Paper Jams	140
Reducing the Frequency of Paper Jams	204
Clearing Staple Jams (For Optional Products)	205
If Memory Becomes Full During Scanning	218
When an Error Message Is Displayed	220
When an Error Code Is Displayed	221
Printer/Fax Driver Troubleshooting	222
Service Call Message	223

Match case Limit results 1 per page

Routine Maintenance

Align the rear edge retainer with the marks for the desired paper size.

LTR

If the rear edge retainer is not aligned properly, paper may become jammed, the quality of the image may

be degraded, or the inside of the machine may become dirty. Make sure to load paper with the rear edge

retainer properly aligned with the paper size marks on the top and base of the paper deck.

Fix the rear edge retainer with the blue screw using a coin or something similar.

Fix the screws by turning them in the clockwise direction.

There are two screw holes for fastening the rear edge retainer. Make sure that it is fastened properly (aligned

with the marks for the desired paper size) to prevent it from being installed at an angle.

Remove the two blue screws on the inner size change plate using a coin or

something similar.