Compaq ProLiant 8000 ProLiant 8000 Servers Maintenance and Service Guide - Page 187
compatible with, this controller
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
6-60 Compaq ProLiant 8000 Servers Maintenance and Service Guide Table 6-16 ADU Diagnostic Messages continued Message Description Swapped cables or Configuration error detected. The cables appear to be interchanged. SOLUTION: Power down system then move the drives or cables back to their original location. ADU has detected a change in the cable configuration. One or more cables may be attached to the incorrect bus. -Or- One or more drives have been moved to new locations. Swapped cables or Configuration error detected. The configuration information on the attached drives is not backward compatible with this controller's firmware. The current firmware version on the controller cannot interpret the configuration information on the attached drives. SOLUTION: Upgrade the firmware on this controller. If this doesn't solve the problem then power down system then move drives back to the original controller. Recommended Action Refer to your user documentation for supported configurations and cabling guidelines. Restore to the original configuration. Upgrade the firmware. -OrIf that does not solve the problem, move the drives back to the original controller. continued