Compaq ProLiant 8000 ProLiant 8000 Servers Maintenance and Service Guide - Page 81
Array Controllers with Extended SCSI, I/O Expansion Slots
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
2-64 Compaq ProLiant 8000 Servers Maintenance and Service Guide Array Controllers with Extended SCSI To remove any array controller with Extended SCSI architecture: 1. Unlock then open the PCI Hot Plug access doors. See "I/O Expansion Slots" earlier in this chapter. 2. Deactivate the expansion board slot LED by pressing the square button on the PCI switchboard . CAUTION: Do not open the slot release lever unless the green PCI Hot Plug LED indicator for the slot is off. System power down and subsequent data loss could occur. Never remove an active controller unless it is redundant. 3. When the green LED is off, push down on the slot release lever then push it back to free the array controller. 4. Slide the slot keeper to the open position. 2 1 4 3 Figure 2-58. Releasing an array controller with Extended SCSI