Compaq ProLiant 8000 ProLiant 8000 Servers Maintenance and Service Guide - Page 90
PCI Hot Plug Interface Board, Remove all I/O expansion boards. See
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Removal and Replacement Procedures 2-73 PCI Hot Plug Interface Board To remove the PCI Hot Plug interface board: 1. Remove the top access panel. See "Top Access Panel" earlier in this chapter. 2. Disconnect the cable securing the interface board to the system board . 3. Remove the extended SCSI dividers. See "Extended SCSI Dividers" earlier in this chapter. 4. Remove all I/O expansion boards. See "I/O Expansion Boards" earlier in this chapter. 5. Open the PCI expansion slot levers. 6. Pull the six push-pull fasteners to release the interface board . 7. Pull the interface board away from the sheet metal . 3 2 1 Figure 2-67. Removing the PCI Hot Plug interface board Reverse steps 1 through 7 to replace the PCI Hot Plug interface board.
Removal and Replacement Procedures
2-73
PCI Hot Plug Interface Board
To remove the PCI Hot Plug interface board:
1.
Remove the top access panel. See
“
Top Access Panel
”
earlier in this chapter.
2.
Disconnect the cable securing the interface board to the system board
.
3.
Remove the extended SCSI dividers. See
“
Extended SCSI Dividers
”
earlier in
this chapter.
4.
Remove all I/O expansion boards. See
“
I/O Expansion Boards
”
earlier in this chapter.
5.
Open the PCI expansion slot levers.
6.
Pull the six push-pull fasteners to release the interface board
.
7.
Pull the interface board away from the sheet metal
.
3
1
2
Figure 2-67.
Removing the PCI Hot Plug interface board
Reverse steps 1 through 7 to replace the PCI Hot Plug interface board.