Compaq ProLiant 8000 ProLiant 8000 Servers Maintenance and Service Guide - Page 88
Hot-Plug Basket Insulator, Remove the Array Controller with Extended SCSI. See
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Removal and Replacement Procedures 2-71 Hot-Plug Basket Insulator To remove the hot-plug basket insulator: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the top access panel. See "Top Access Panel" earlier in this chapter. 3. Remove the NC3131 Fast Ethernet NIC. See "I/O Expansion Boards" earlier in this chapter. 4. Remove the Array Controller with Extended SCSI. See "Array Controllers with Extended SCSI" earlier in this chapter. 5. Remove the extended SCSI dividers. See "Extended SCSI Dividers" earlier in this chapter. 6. Remove any installed I/O expansion boards. See "I/O Expansion Boards" earlier in this chapter. 7. Disconnect cables for the power switch, the PCI Hot-Plug interface, and the fan/speaker. 8. Pull up on the hot-plug basket insulator tab to release the basket . Then move the basket forward to release it from the keyholes. 9. Lift the hot-plug basket insulator out the top of the server . 2 1 Figure 2-65. Removing the hot-plug basket insulator Reverse steps 1 through 9 to replace the hot-plug basket insulator.