Dell 5110cn User Guide - Page 159

Adobe Protocol Purpose: To specify PostScript communication protocol for each interface. You can configure Adobe Protocol settings for Network. The change becomes effective after the printer is turned off and then on again. Values: Auto* Used when auto-detecting the PostScript communication protocol. Used when the communication protocol is in ASCII interface. Standard BCP Used when the communication protocol is in binary format. TBCP Used when the communication protocol supports both ASCII and binary data to switch between them according to the specified control code. Binary Used when no special processing is required. Wireless Net Use the Wireless Net menu to change printer settings affecting jobs sent to the printer through a wireless network. NOTE: The Wireless Net menu is only displayed when an optional multi protocol card is installed on the printer and the optional wireless printer adapter is installed on the card. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Status Purpose: To display the information on the wireless signal strength. Any change cannot be made on the operator panel to improve the status of the wireless connection. Values: