Dell 5110cn User Guide - Page 40

Ethernet*1 Ethernet Settings Auto Detects Ethernet transmission rate and the duplex settings automatically. 10Base-T Selects 10Base-T Half-Duplex as the default value. Half-Duplex 10Base-T Selects 10Base-T Full-Duplex as the default value. Full-Duplex 100Base-TX Selects 100Base-T Half-Duplex as the default value. Half-Duplex 100Base-TX Selects 100Base-T Full-Duplex as the default value. Full-Duplex Current Ethernet Settings Displays the current settings of Ethernet. MAC Address Displays the printer's MAC address. Port Settings LPD Port9100 IPP*2 Select the check box to enable the LPD. Select the check box to enable the Port9100. Select the check box to enable the IPP port. WSD Select the check box to enable the WSD port. FTP SMB*2 NetWare*2 AppleTalk*2 Bonjour (mDNS)*2 Select the check box to enable the FTP port. Select the check box to enable the SMB. You can also configure the transport protocol to be used. TCP/IP and NetBEUI can be selected simultaneously as the transport protocol. Select the check box to enable the NetWare port. You can also configure the transport protocol to be used. IPX/SPX and TCP/IP can be selected simultaneously as the transport protocol. Select the check box to enable the AppleTalk port. Select the check box to enable the Bonjour (mDNS) feature. E-Mail Alert Select the check box to enable the E-Mail Alert feature. SNMP Agent Select the check box to enable the SNMP. You can also configure the transport protocol to be used. UDP and IPX can be selected simultaneously as the transport protocol. IPX is only available when the multi protocol card is installed. *1 The Ethernet settings are not displayed when the optional wireless printer adapter is installed. *2 An optional multi protocol card is required to display these items.