Dell 5110cn User Guide - Page 50

To configure the detailed settings for the IP Filter used for LPD and Port9100. This page can be linked from LPD and Port9100 settings on the TCP/IP page. Values: Address Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of "aaa.bbb.ccc.ddd." However, 127 and 224 to 254 cannot be used to "aaa." Address Mask Sets the Address Mask in the Mask field. Enter a numeric value between 0 and 255 in each field. Active Mode Permit Permits printing from specified network address. Disabled Disables the IP Filter feature for the specified IP address. Reject Rejects printing from specified network address. When you make the settings for the filter, enter the IP address of the IP Filter in the Address field and the Subnet Mask in the Address Mask field. Enter a numeric value between 0 and 255 in each field. "*" is appended to the current value. Setup Procedure You can set up to a maximum of five items and the first item takes priority. Enter the shortest address first before proceeding to the next longer address when setting multiple filters. The following section explains how the IP Filter operates. IP Filter Procedure Enabling Printing From a Specified User The following describes the procedure to enable printing only from the "192.168.100.10" IP address. Procedures: 1. Click the first column of Access List row 1. 2. Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field. 3. Select Permit. 4. Click Apply New Settings. Disabling Printing From a Specified User