Dell 5110cn User Guide - Page 44

FTP IP Filter (IPv4)*2 Password Sets whether to enable or disable the password. And also specifies the password value up to seven characters. Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds. Access List Enter the IP address which is added to the IP filter list. Subnet Mask Enter the subnet mask. Operation Select from Disable, Permit, or Reject. Selecting Disable deactivates the IP filter function. However, selecting Permit (or Reject) allows (or blocks) the network access from the IP addresses registered on the IP filter list. *1 An optional multi protocol card is required to use. *2 This item is only available for LPD or Port9100. NetWare Purpose: To configure detailed settings for IPX/SPX and NetWare. Values: IPX/SPX Frame Settings Type Auto Specifies the active frame type automatically. Ethernet II Selects Ethernet II frame type. Ethernet 802.3 Selects IEEE802.3 frame type. Ethernet 802.2 Selects IEEE802.2 frame type. Ethernet SNAP Selects SNAP frame type. Current Frame Type Displays the current frame type. Network Address Displays the IPX network address. NetWare Device Name*1 Specifies the printer name up to 47 alphanumeric characters. For PServer Mode, set the Print Server Name (Print Server Object Name). The original setting remains valid if no input is made. Active Mode Bindery: PServer Mode Selects this option when using Bindery: PServer Mode.