Dell 5110cn User Guide - Page 24

Power Saver Time Displays the amount of time before the printer enters the power saver mode after it finishes a print job in minutes between 5 and 60. Alert Tone Specifies whether the printer sounds an alarm when an error occurs. Time-Out Specifies the amount of time the printer waits to receive additional bytes of data from the computer. When this timeout expires, the print job is canceled. Panel Language Determines the language of the text on the operator panel screen. Auto Log Print Specifies whether the printer outputs logs automatically. Print ID Specifies a location where the user ID is printed. Print Text Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it. Banner Sheet Insert Position Specifies the position of banner sheet. Banner Sheet Specify Tray Specifies the tray in which the banner sheet is loaded. Substitute Tray Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper size settings for the current job. mm / inch Switches measurements between millimeters and inches. RAM Disk Specifies whether to allocate memory to the RAM Disk file system for the Secure Print and Store Print features. This item is only available when the 256 MB, or higher, optional memory card is installed, and also when the optional hard disk is not installed. Parallel Settings Purpose: To configure the parallel interface. Values: ECP Specifies the ECP communication mode of the parallel interface. Adobe Protocol Specifies PostScript communication protocol for each interface. Network Settings Purpose: To Specify the PostScript communication protocol for this printer.